Industrias

Experiencia e innovación

Acerca de

Póngase en contacto con

+1.800.511.1659

Use of Sterilex PerQuat Solutions in a Stock Solution

El tratamiento de mantenimiento se realiza generalmente con una frecuencia mínima de una vez por semana y a una concentración de 12,8-16,0 onzas líquidas de cada solución por galón de agua. Consulte las fichas técnicas de los productos para garantizar la compatibilidad del material con las piezas de la fregadora.

  1. Put on proper PPE. This includes goggles and/or face shield, protective clothing, and rubber gloves.
  2. Prepare a stock solution of Sterilex Ultra Disinfectant Cleaner Solution 1 and Sterilex Ultra Activator Solution.
    1. Fill a graduated, 5-gallon bucket with 2 gallons of water.
    2. Add 32 fl oz (1 qt) of Sterilex Ultra Disinfectant Cleaner Solution 1 to the bucket.
    3. Add 32 fl oz (1 qt) of Sterilex Ultra Activator Solution to the bucket. The bucket should be filled to the 2.5 gal (10 qt) line.
    4. For larger volumes, the same ratios can be applied adding 16 fl oz (0.5 qt) of Sterilex Ultra Disinfectant Cleaner Solution 1 and 16 fl oz (0.5 qt) of Sterilex Ultra Activator Solution for each additional gallon of water.
  3. Add stock solution to a mop or utility bucket and apply using a mop or squeegee.
  4. Allow surfaces to remain visibly wet for AT LEAST 10 minutes.
  5. Rinse all food contact surfaces thoroughly with a potable water rinse. For non-food contact surfaces wipe, rinse, or allow surface to air dry.

Notas de uso
All stock solutions must be used within 8 hours. Pour any excess stock solution down a sanitary drain. For application on hard, non-porous surfaces only. Directions for use are consistent with those for Feline calicivirus. See product label for details.

Fill out the form to download a PDF of the Floor Mopping SSOP

¿PREGUNTAS?

"*" indica los campos obligatorios

Este campo tiene fines de validación y no debe modificarse.